|
|
|
 |
□ Present Page || ☞ HOME
▷ HLM-100P Hand Held Digital Hardness tester |
|
MODEL: HLM-100P Hand Held Digital Hardness tester
|
Automatic conversion between different hardness scales: Correlations between HL values and other standard hardness Values (Brinell, Vickers, Rockwell and Shore) have been established for 9 most commonly used materials. Conversions between different scales can be readily accomplished.
Measurements can be made from several different directions: This feature makes it convenient to conduct hardness measurements on a large part or within a confined space.
The measuring accuracy may be compromised if erroneous data with an abnormally large deviation are accepted. The instrument provides a manual error-correcting deleting function during batch test situations.
High batch testing efficiency: For a batch test that involves testing a large number of similar parts, the expected range of hardness values can be pre-set based on different requirements for improved testing efficiency. Upper or lower hardness limits can be pre-set for material sorting.
■ Functions:
Data printing functions: Data acquired may be printed out immediately or stored and printed at a later time.
RS-232C Communication port: Transfer data to a PC for further data reduction and processing.
Automatic power-off: When the tester remains idle for 4 minutes (no measurement made and no key-pad pressing operation) or when battery power is below a critical level, tester power will be automatically switched off.
Auto Re-set: During power-up and power-down, the tester is capable of automatic re-setting.
LCD backlit by advance Electro-Luminescence (EL) technology: Liquid crystal display with back-illuminating capability.
Intelligent battery recharge management.
Pre-Loaded Material Codes: Steel, Cast steel, Alloy Tool Steel, Grey Cast Iron, Nodular Cast Iron, Aluminium Alloys, Brass, Bronze, Copper alloys
Strength testing Conversion for steel and cast steel.
|
|
■ MODEL: HLM-100P Hand Held Digital Hardness tester Specifications |
| Measuring precision | relative error ± 0.8% (750-800LD) |
| Measuring ranges | LD: 200~900 / HB: 30~655 / HRC: 20~68 / HRB: 20~101. / HV 80~940
HSD 32.5~99.5 |
| Display | 128 x 64 LCD |
| Impact Device | D Type (Option: DC, D+15, DL, C, G and E) |
| Memory | 1250 Group |
| Workpiece Min Weight & Depth | 2Kg x 0.8mm(t) |
| Memory | 1250 Group |
| Working temperature | 0°C ~ 45°C |
| Relative humidity | < 90% RH |
| Power | 4 Ni-MH batteries (1.2 Volts x 4). |
| Battery re-charge time | approximately 3 hours |
| Automatic power-off | when idle for 4 minutes |
| RS-232C communication port | transfers data to a PC for further processing, display and printing. |
| Mini-printer | may print out data immediately after measurement or at a later time. |
| Print paper | paper : 30mm x 44mm |
| Dimensions | 224mm x 84mm x 38mm |
| Tester weight | 0.7kg (excluding the impact probe) |
|
■ MODEL: HLM-100P Materials & Measuring Range(IMPACT DEVICES PROBE D, DC TYPE) |
|
NO |
Materials |
LD |
HRC |
HRB |
HB(30D²) |
HSD |
HV |
|
1 |
Steel & Cast Steel |
300-900 |
20-68 |
38.4-99.5 |
80-647 |
23.5-99.5 |
80-940 |
|
2 |
Alloy tool Steel |
300-840 |
20.4-67.1 |
|
|
|
80-898 |
|
3 |
Stainless steel |
300-800 |
19.6-62.4 |
46.5-101.7 |
86-655 |
|
85-802 |
|
4 |
Grey Cast Iron |
400-660 |
|
|
131-387 |
Has not been heat treated |
|
5 |
Nodular Cast Iron |
360-650 |
|
|
90-334 |
|
6 |
Cast AL alloy |
200-560 |
|
|
(10D²)30-160 |
|
|
|
7 |
Brass |
200-550 |
|
20.0-95.3 |
40-173 |
|
|
|
8 |
Bronze |
300-700 |
|
|
60-290 |
|
|
|
9 |
Copper |
200-690 |
|
|
45-315 |
|
|
|
10 |
Bearing Steel |
518-872 |
20.0-65.0 |
|
|
|
|
|
■ MODEL: HLM-100P Hand Held Digital Hardness tester Standard Package List |
| 01 | Main Tester Unit with Built-In Mini-Printer | 1 |
| 02 | Impact Device (Type D) | 1 |
| 03 | Standard Testing Calibration Block(D Type with Certificate) | 1 |
| 04 | Small Supporting Ring (D6a) | 1 |
| 05 | RS-232C Communication Cable and Software Disk | 1 |
| 06 | Rolls Printer Paper | 1 |
| 07 | AC Adapter | 1 |
| 08 | Operation Manual | 1 |
| 09 | Warranty Certificate | 1 |
| 10 | Cleaning Brush | 1 |
| 11 | Carrying Case | 1
|
|
|
 | |
 Comapny Name: Metal Network Korea Company
Add: E-Space No. 310, #212-26, Guro-3Dong, Guro-Gu, Seoul, 152-053 Korea
 Korea Head Office/ Tel: +82-2-3281-5037 Fax: +82-2-3281-0280
China Shanghai Office/ TEL:+86-21-6402-6190 FAX:+86-21-6402-8912 | |
|
